How to Fix the HP Printer Problems

While HP printers are very reliable, even the most demanding products for both personal and professional usage, they are still problematic and failed to work at times. There are several reasons for the failure of HP printers, and finding the appropriate cause of the issue will help you resolve it a bit easier. 

Also, you can seek the customer support of experts by dialing the HP printercustomer care number and solve the problems efficiently. Otherwise, check the following guide in order to fix the standard HP printer problems. 

Step 1 – Find out the source of printer’s failure either by printing a test page or sending a print message to your HP printer. Make sure that the paper goes through the correct path and see how far it is before a paper jam encounters.

Step 2 – Tug out all of the paper trays except one if your printer has many trays. If your HP printer operates well with one tray instead of multiple, the problem is most likely with the tray, worn or the defected rollers.

Step 3 – Remove the defective paper tray. To do so, tug it out from its position, and then gradually raise the tray until to take it out of the printer. Put the tray aside and check for the rollers on your machine.

Step 4 – Check the print rollers condition by touching it with your hand. They should be uneven to the touch. However, if the rollers are smooth, then they are just worn out, and you need to replace them with the new ones. To take the old defective rollers out of your printer, slide them off the point and put aside. After that, you can place the new rollers by pressing them until they’re set correctly. Once it clicks into the proper position, it means they have seated appropriately.

Step 5 – Be careful when you’re pushing the tray back, ensuring it moves into your printer smoothly. Print a test page and see if the Jam has been cleared out.

Step 6 – The Fuser cartridge is one other common cause of the HP printer not to work. In most of the HP printer models, you will find it on the left-hand corner. Raise and access the left side door and search for the black rectangular cartridge. Before you tug it out, allow your printer to turn cold, because the Fuser can be too warm.

Step 7 – Flip the joints keeping the Fuser in position to the open place and take it out of the printer. Check the print rollers on the Fuser, and they should slide effortlessly. If the wheels are not moving, it means that the Fuser is faulty and will require being replaced. Move the new Fuser until it clicks into the position in your printer, and then flip the switches to the specific place. Start your printer and print a test page again.

Step 8 – Check that the power supply is proper if your HP printer will not turn on or it turns off all of a sudden. Although most of the laser printers use the standard electrical cable, HP photo and Desk Jet printers usually use the expensive power supply. To do so, check the power brick to see if it’s warm to the touch instead of too hot. If it’s hot, it may be overheating, and you will require replacing it.

However, if you continue to face one of the following troublesome situations, it’s strictly suggested to consult the IT engineers to get more solutions. The HP printercustomer support number allows you to directly avail the tech support to get rid of your printer-related problems in no time.